Crastin SK601 NC010下载Crastin SK601 NC010物性表Crastin® SK601 NC010物性表基本信息黄卡编号E41938-257817填料/增强材料玻璃纤维增强材料, 10% 填料按重量添加剂脱模机构评级UL未评级形式粒子加工方法注射成型多点数据Creep Modulus vs. Time (ISO 11403-1)IsochronousStress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO11403-1)Secant Modulus vs. Strain (ISO 11403-1)Shear Modulus vs.Temperature (ISO 11403-1)Shear Stress vs. Shear Rate (ISO11403-1)Specific Volume vs Temperature (ISO 11403-2)Viscosity vs.Shear Rate (ISO 11403-2)部件标识代码 (ISO 11469)>PBT-GF10树脂ID (ISO1043)PBT-GF10物理性能额定值单位制测试方法密度1.37g/cm³ISO 1183熔流率（熔体流动速率）18g/10minISO 1133溶化体积流率（MVR）(250°C/2.16 kg)15.0cm³/10minISO1133收缩率ISO 294-4垂直流动方向1.2%ISO294-4流动方向0.70%ISO 294-4吸水率ISO6223°C, 24 hr, 2.00 mm0.40%ISO62平衡, 23°C, 2.00 mm, 50% RH0.20%ISO62粘数110cm³/gISO 307机械性能额定值单位制测试方法拉伸模量4500MPaISO527-2拉伸应力(断裂)90.0MPaISO 527-2拉伸应变(断裂)4.7%ISO527-2拉伸蠕变模量ISO 899-11 hr4000MPaISO899-11000 hr2500MPaISO 899-1弯曲应力140MPaISO178冲击性能额定值单位制测试方法简支梁缺口冲击强度ISO179/1eA-30°C6.0kJ/m²ISO179/1eA23°C6.0kJ/m²ISO 179/1eA简支梁无缺口冲击强度ISO179/1eU-30°C40kJ/m²ISO179/1eU23°C40kJ/m²ISO 179/1eU悬壁梁缺口冲击强度ISO180/1A-30°C5.0kJ/m²ISO180/1A23°C4.5kJ/m²ISO 180/1A无缺口伊佐德冲击强度ISO180/1U-30°C26kJ/m²ISO180/1U23°C27kJ/m²ISO180/1U热性能额定值单位制测试方法热变形温度0.45 MPa,未退火215°CISO 75-2/B1.8 MPa, 未退火175°CISO75-2/A维卡软化温度205°CISO 306/B50熔融温度1225°CISO 11357-3线形热膨胀系数ISO11359-2流动6.0E-5cm/cm/°CISO11359-2横向1.2E-4cm/cm/°CISO11359-2电气性能额定值单位制测试方法体积电阻率> 1.0E+15ohms·cmIEC60093介电强度30kV/mmIEC 60243-1相对电容率IEC60250100 Hz3.90IEC602501 MHz3.50IEC 60250耗散因数IEC60250100 Hz2.0E-3IEC602501 MHz0.020IEC 60250漏电起痕指数300VIEC60112可燃性额定值单位制测试方法燃烧速率(1.00 mm)36mm/minISO 3795可燃性等级IEC60695-11-10, -200.800 mmHBIEC 60695-11-10,-201.50 mmHBIEC 60695-11-10, -20极限氧指数20%ISO4589-2充模分析额定值单位制熔体密度1.19g/cm³Specific Heat Capacity ofMelt1890J/kg/°CThermal Conductivity of Melt0.24W/m/K备注1 .10°C/min